Home
Lakota Aeromag
There is no translation for this page avaliable at the moment, sorry for inconvinience
Vjetroturbine Lakota 900W 12/24/48V



Aeromag's Lakota Wind Turbine
with AEROMAG Carbon Fiber Blades



vjetturb_aeromag_lakota.pngLightweight and Powerful!
This enhanced upward furling wind turbine with Aeromag's carbon fiber blades delivers more power in lower wind speeds!
Alt-E Store Comment:
Many of our customers have asked:
"How does this compare to the Southwest Wind Power Whisper H40 or H80?"
In terms of kilowatt-hours produced per month the Lakota wind turbine is similar to the H80, however it's price is similar to the lower rated H40. And unlike either the H40 or the H80, due to its advanced carbon fiber blades and robust design the Lakota will keep on producing more and more power at higher wind speeds (checkout the graphs below). Whereas with most wind turbines, once you go over the rated air speed their power production drops dramatically. You'll find this wind turbine responds more quickly to sudden strong gusts of winds, maximizing the actual power (watt-hours) you'll produce. We think that this turbine is probably one of the best mixes of quality, robust design and value available today.

vjetturb_aeromag_lakota_02.pngvjetturb_aeromag_lakota_01.png



Available in:    12V, 24V, 48V, 96V, 192V         Land, Marine or Camouflage   High wind Speed or Low wind speed
Features
·   Rated 900 Watts Power Output at 28.8 mph
·   Peak 1300 Watts Power Output at 38+ mph
·   Start-up wind speed at 6.5 mph
·   Charges 1 Ampere (12 volt turbine) at 9 mph
·   Nominal 12, 24 & 48 Volt available
·   Can be optimized Low or High Average Wind Speeds (tell us in advance what you would like)
·   Lightweight 35 lbs. (17kg)
·   Produces very little noise
·   Aluminum body with all stainless steel hardware
·   Rare Earth Neodymium Iron Boron Permanent Magnets
·   USCG approved tinned Copper wire for marine use
·   Self-governing Rotor Design
·   Permanently Sealed Unit
·   Special Marine Coating available (additional cost) 
 
Blades
·    Precision, computer designed low inertia Blades
·    "Stealth-Acoustic" blade technology is very quiet and invisible to radar and no  TV/radio interference
·    7 times stiffer than steel, means no flutter, low noise, more energy Smoother and far quieter than wood, plastic, injection molded, or fiberglass reinforced blades
·     Can be optimized for Low or High Wind environments
·     Upward furling design does not hide from the wind
·     Produces full power even beyond 60 mph winds!
·     Warranty of 7 years Lakota's Advanced Features
·     Aerospace grade, advanced technology, unidirectional Carbon Fiber Blades
·     Helicopter leading edge tape on each blade
·     Smoother and far quieter than wood, plastic, injection molded or fiberglass reinforced blades
·     Unprecedented 7 year warranty on the blades
·     Extended warranty up to 10 years available on the blades
·     Precision, computer designed aircraft quality rotor
·     Stainless steel hub plates


 
Specifications
·     Power Output for Sea Level Conditions:
      300 Watt nominal at 16.5 mph
      500 Watt nominal at 21.5 mph
      900 Watt nominal at 28.8 mph
      Peak Power maintained above 1200-1500 Watts at higher wind speeds
      Users have reported over 1500 Watts at 100 Amps
·     Nominal 12, 24, 48 Volt
Lightweight 35lbs. (<16kg)
·     Rotor Diameter: 82.3 in (2.090 m)
·     Swept Area: 36.9 ft2 (3.43 m2)
·     Start-up Wind Speed: 6 mph (2.7 m/s)
·     Alternator: 3 Phase AC Brushless Permanent Magnet

icon Lakota 900 brošura (182.84 kB)  

 
[ Back ]
  • English
  • Hrvatski